Willspeed RF2 B6.1 Conversion kit build

[MHeadling]

Hi Guys, Im doing a build thread on the proto B6.1 Willspeed conversion over on rctech, check it out here

https://www.rctech.net/forum/electri...kit-build.html

[Steve.T]

Will this conversion work with a b6?

[daz75]

I see you've mentioned some nuts and spacers you've used. Does that not come with either of the kits

[MHeadling]

You get the hardware for the conversion and I'll feedback in on the extra bits i used to they are included, as for the servo shims you'll need to source these yourself if using full size servo or go for a low profile one, really just depends on what electrics you run

Yes I built this off a B6 and will update the thread with the parts I used shortly

[MHeadling]

Part numbers updated on Rc tech thread if you want to covert a B6

[MHeadling]

All done and ready for Sunday

[Steve.T]

Originally Posted by MHeadling

Part numbers updated on Rc tech thread if you want to covert a B6

Much appriciated. I have a couple more questions.
Whats the benefit over a standard b6/b6.1?
will work in slippery conditions bearing in mind the motor position?