|
#1
|
|||
|
|||
vinyl for masking shell?
Hi All,
Wanting to paint some basic two or three colour designs on lexan shells. I've seen folks using vinyl to make masks up, but I wondered what people were using and where they got it from. I have some vinyl at work for sign making, which I have made window masks from in the past, but when peeling it left a fair bit of residue. Not aiming for anything top ambitious, just maybe a basic flame design for example. Thanks for any info, Craig |
#2
|
|||
|
|||
|
#3
|
||||
|
||||
give jon at rcs a look
http://www.rcsgraphicworx.co.uk/shop.php?cat=12
__________________
Mattys the driver,my names carl
|
#4
|
|||
|
|||
Have a look on eBay, You can buy A4 sheets of Airbrushing Vinyl.
|
#5
|
||||
|
||||
all ways used vinyl and masking tape in the past to varied results then tried liquid mask and found it much better dont get any bleeding like you can with tape so thats all i use now
__________________
Schumacher kf Schumacher sv2 Durango Dex210 Carisma gtb x2 Schumacher gt12 x2 |
#6
|
||||
|
||||
Cheepo vinyl and use a hair dryer to heat it when removing, no residue
Best stuff iv found was in poundland quid for a 5 meter roll
__________________
www.RCraceTV.co.uk www.bedsrcmcc.co.uk www.crcccc.org.uk www.westsuffolkmcc.com Trader Feedback Here |
#7
|
|||
|
|||
Brilliant guys, thanks for all the tips!
Will have a look in Poundland later, and will try the hairdryer method with the stuff from work on a scrap piece of lexan later. Cheers Craig |
Thread Tools | |
Display Modes | |
|
|