Go Back   oOple.com Forums > Events & Venues > CLUB TALK > Batley Buggy Club

Reply
 
Thread Tools Display Modes
  #1  
Old 18-02-2014
Haldenby81 Haldenby81 is offline
Member
 
Join Date: Dec 2013
Posts: 114
Default DEX210 set up sheet

Hi guys been coming to club for while now but never really done any set up on the car apart from ride height and shock oil, was thinking it's about time I did something more and set her up properly or a bit more like should be, so been looking on the durango site for set up sheets for batley to give me an idear, but the only ones I found wore for the outdoor track :-/ can anyone point me in the direction of a basic set up for whitcliff please or would I set her up like it is for chadderton? Thanks
Danny
Reply With Quote
  #2  
Old 18-02-2014
Cremegg's Avatar
Cremegg Cremegg is offline
Senior Member
 
Join Date: Dec 2012
Location: Darwen, Lancs
Posts: 383
Default

might be a few on here

http://www.petitrc.com/setup/durango...ngoDEX210.html

cheers
__________________
BMRCC Member

TLR 22 2.0
Speed Passion
Sanwa
SMC
Reply With Quote
  #3  
Old 18-02-2014
Haldenby81 Haldenby81 is offline
Member
 
Join Date: Dec 2013
Posts: 114
Default

Thanks fella very helpful
Reply With Quote
  #4  
Old 18-02-2014
Great_Thark Great_Thark is offline
Member
 
Join Date: Sep 2012
Location: yorkshire
Posts: 173
Default

check the durango sub forum
Reply With Quote
  #5  
Old 18-02-2014
NeilRalph77's Avatar
NeilRalph77 NeilRalph77 is offline
Senior Member
 
Join Date: Sep 2010
Location: LV-426
Posts: 770
Default

Craig posted this quite a while ago I'm still not that far away from it.

Hi mate,

i seem to have found a generic set up for my 210 which works on nearly all tracks.

Now all i do is fine tune a few things, such as ride height and front camber links.

This is my generic set up:

Front:

Shocks = 3x1.6mm pistons, 35wt oil, dark blue spring. Middle hole on shock tower, outer hole on wishbone.

Caster = 30 degree (+5 insert)

axle = trailing (kit standard)

Camber link = outer hole on hub & outer hole shock tower for high grip. Inner hole on hub & inner hole on shock tower tower for low traction. 2mm washers under inner ball stud.

Ackerman = Middle hole.

Rear:

Shocks = 4x1.6mm pistons, 30wt oil, light green springs. Middle hole on shock tower, middle hole on wishbone.

Toe in = 3 degree (0 degree inserts)

Anti-squat = 1.5

Camber links = 2mm washer under inner ball stud, 2nd from outer hole on hub.

Wheelbase = middle

Diff = geared diff with 1k oil on really high grip tracks (all carpet or astro), ball diff everywhere else.

Battery position = middle

Droop = maximum (wishbone screws all the way in)

The above hardly changes on any track. I only make very small changes depending what the car is doing on the day.

Hope this helps.

Craig Collinson.
__________________
----Cougar 2 team----Cougar 2 works----Cougar 2000----
----Schumacher Bosscat----
----Traxxas TRX1----Losi XXX CR----Losi XXX BK2----
----AE B4 ft----Xfactory X6^----DEX210 V1----
----TLR22 3.0----TLR22 4.0----TLR22t 4.0----TLR22 5.0AC----
----AE B6.4----
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com