|
#1
|
||||
|
||||
Sanwa Exzes in Aero
Anyone tried fitting this receiver?
Or any others, other than Spektrum micro?? |
#2
|
||||
|
||||
Dave, i use the little KO one that comes with the universe transmitter.
|
#3
|
||||
|
||||
Hi again mate,
is that the 40mhz it comes with? I built the steering rack on my kit and the futaba won't go in there! |
#4
|
||||
|
||||
Simon Bettens drives Aero with a Sanwa thing, I'll ask him or maybe he'll be here and answer you before I got the chance.
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
#5
|
||||
|
||||
Yes dave its the one you get as part of the package.
I would also get yourself a couple of pairs of b44 wishbones the aero fronts are like cheese, i broke 1 in a year on the bj4 and i have done both fronts on the aero in 5 packs of cells Its an easy mod just run a 3mm drill through the holes where the hinge pins go and take off the little knob, at the abck of the wishbone, you will see where i mean. |
#7
|
||||
|
||||
Quote:
Impressive |
#8
|
||||
|
||||
That's not something you should boast about
__________________
Nortech is ACE! |
#9
|
||||
|
||||
How about LEGEND? he was excited at the fact he broke 3 rear shocktowers on his B4 in one meeting
Sorry that was very offtopic
__________________
Canon 40D (350D backup) - EF-S 18-55 - EF-S 17-85 - EF 100-300 - EF 50 - Canon 430 EX || Speedlite - Canon BG-E2N Grip Adobe Photoshop CS4 Extended AX-10 Crawler - Thats all I have left!!!
|
#10
|
||||
|
||||
Quote:
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#11
|
||||
|
||||
Quote:
The big spektrum receiver fits also but then you have to dremel a bit, so I won't advise it. But if you only drive brushed than you can put the speedo underneath the steering rack and put the receiver on the place of the speedo. Simon |
#12
|
||||
|
||||
the 40mhz blue cased Sanwa I have won't fit in, ever. But the smaller black cased ones will - have a look at my other post.. I'm sure you already did it anyway but hey!
|
#13
|
||||
|
||||
I went micro in the end Jimmy as when I mocked it up on full lock the steering fouled the receiver, but when I then attached the suspension/servo (having sold the sanwa and bought the micro!) I realised that you don't really use all the steering link lock in reality so it would have fit all along, doh!!
By the way, I think (haven't tried it but looked) if you use an R1 esc and mount it upright then the futaba 2.4 receiver will fit in between the servo and esc! |
|
|