|
#1
|
|||
|
|||
M3 mini lock nuts, can anyone help?
Guys
See the attached photos, one is an associated 4/40 mini lock nut and the other one is a Schumacher m3 lock nut. Now what I'm after are some m3 mini lock nuts the same size as the 4/40 ones. I'm guessing they are available but it's hard to tell looking at photos if there the same size as the larger Schumacher m3 nuts.... Any ideas? Gaz http://smg.photobucket.com/user/hill...504A3.jpg.html http://smg.photobucket.com/user/hill...C0737.jpg.html
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models Last edited by gazhillAE; 01-02-2015 at 11:55 PM. |
#2
|
||||
|
||||
Never seen any m3 nuts other than those with a 5.5mm hex (the 4-40 you are referring to are 3/16 hence 4.7625mm) . But if it's the height you are after, there are some possibilities for low profile m3 locknuts.
http://www.rccarshop.co.uk/index.php...w-profile.html |
#3
|
|||
|
|||
Quote:
I actually spotted those last night and ordered some. Il have to wait and see when they arrive! Gaz
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#4
|
||||
|
||||
They are still 5.5mm, just shorter than a regular m3 locknut.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#5
|
||||
|
||||
Just re tap it with m3 cut!
I did that for the steering spindel and the other holes on the b44.3 when mounting the b5 balcups and ball studs on it! |
#6
|
|||
|
|||
Quote:
Will another m3 screw forced in do what i need? Gaz
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
|
|