|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How should I oil/grease/libricate screws and parts when re-assembling old buggy
I've taken my old B4 buggy apart and cleaned the bits thoroughly.
Hopefully I'll be able get it back together and running smoother! 1. Is it necessary or even detrimental to put anything on the clean screws before reassembling (its metal going into plastic right ? ) so maybe not needed? 2. Should I put grease on the transmission gears inside the rear assembly? They look clean and in perfect condition still and doesn't look like there has been any grease on them, which made me wonder. 3. Is it necessary to lubricate any of the other parts like hinge pins etc? Thanks, any advice appreciated. |
#2
|
||||
|
||||
Main thing to do would be to make sure all the heads are good on the screws and not stripped and to clean, make sure all gears are in good condition and re grease. All should be good, only recently did a full strip and clean down of a xxcr I bought.
__________________
TLR 22 5.0 AC Elite TLR 22x4 Elite TeamC Tm2v1 TeamC Tco2c Evo Veteran |
|
|