|
#1
|
||||
|
||||
RB5 turnbuckle lengths
Hi guys,
Wondered if someone can help me. I'm looking for the turnbuckle lengths for the RB5 please? Cheers, Stanners |
#2
|
|||
|
|||
The manual says 50mm
|
#3
|
||||
|
||||
The latest SP items are 3mm x 40mm but are pretty difficult to get hold of..
http://www.infernosonly.com/SearchRe...=16&Search.y=6 Plus you need to get hold of the new ball ends which are much longer, so when it comes to changing camber links its just a question of lengthening or shortening these. http://www.infernosonly.com/SearchRe...=22&Search.y=7 With the 3mm x 50mm you have to physically change the ball ends which come in 4 different lengths..(dependent on where your running your links obviously..) the link below is for the harderplastic ones to go with the 50mm turnbuckles. http://www.infernosonly.com/SearchRe...?Search=um112h Have a look here.. (online manual for both RB5 & RB5SP) and you will see the difference.. http://www.infernosonly.com/Download...nuals_s/25.htm Cheers Nick |
#4
|
|||
|
|||
I use AE B4 FT blue turnbuckles.
__________________
MOST important don't crash. Kyosho DB1 Kyosho Vega RB5 GenII Kyosho RB 6.7 MB MODELS www.rccarshop.co.uk www.ghostrc.co.uk |
#5
|
||||
|
||||
very helpful, cheers everyone
|
#6
|
||||
|
||||
Dude... i told you to use a b4 set you tool....
__________________
yes..... it's a dead sheep... |
#7
|
||||
|
||||
bite me!
|
Thread Tools | |
Display Modes | |
|
|