|
#1
|
||||
|
||||
Lipo in starter box
Hey guys, what do i need to use lipos in starter box? obviously a special lead?is that it?
what do you use to hold them inside? chris
__________________
MY FEEDBACK - http://oople.com/forums/showthread.p...hris+Griffiths XRAY Tecnopower AKA AMMO Fuel HUDY RC Disco |
#2
|
||||
|
||||
Hi, not sure about the lead, i think it is just a lead with deans connector. try getting flat long lipo batteries and hopefully they will fit in the original 7.2v batteries holder. I think mayby you could use 7.4v lipo
cheers Michael |
#3
|
||||
|
||||
an 11.1v lipo will be ok
|
#4
|
|||
|
|||
i run both in my smd blue box
either a tornado 2500 25c 11.1 or the same but 14.8v the 14.8 will turn over the tightest new engine no probs. |
#5
|
||||
|
||||
personally i use 14.8 volts,4s lipo, just get a good un or it will puff!
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#6
|
||||
|
||||
If safety is a concern, give LiFe batteries a look. Turnigy now have reasonably priced LiFe packs available on Hobbycity/Hobbyking.
__________________
Photos: Oople Invernational 2010 - Sodden Sunday Muchmore N. Irish GP 2010 (Touring cars) BADMCC 1/8th Nitro buggies Current cars: X6^2 | JC BJ4WE | TM E4 & E4JS | HPI E-Firestorm | Losi Crawler | + many F1s, super crawlers, scalers, drifters in the works... |
#7
|
|||
|
|||
I used 2 x Demon 5000mah 7.4v's in my SMD Evo to make a 14.8v pack and it never burnt the motors out and was 40% more powerful than any gel cell I've ever tried. Incredible performance.
__________________
HoBao HyperStar Pro UK - OS V-Spec Speed // JP-4 // ACE DS1015 // Savox 1258 Team Losi Mini 8ight - Gen's Ace 1800mah Lipo // EZRun 35A ESC |
#8
|
||||
|
||||
Quote:
I have a spare Tornado 14.8v 3700 22C Lipo that i was thinking of using, would this be any good ???
__________________
{CML Distribution} {Penguin Bodyshells} |
|
|