|
#1561
|
||||
|
||||
Thanks for the reply...its connected to a 10.5 tekin..with a new sensor lead.. really strange...
|
#1562
|
||||
|
||||
1s or 2s?
__________________
Tekin Team Manager |
#1563
|
||||
|
||||
Quote:
Bring it with you on Saturday and I will run through it all with you,have you a Hotwire. I found before with another esc that it was the radio not set at zero trims etc that can stop the esc arming.? |
#1564
|
||||
|
||||
Rx8
Just got a new rx8. Was wondering if the 3 screws in the box go in the bottom of the esc. Also what's the best way to mount it
__________________
RB5 vega MCD RR5 ULTIMATE losi TEN scte losi eight 2.0e Traxxas xmaxx xray xb4 16 kyosho laser zx-r Losi xx team xtreme x11 predator X2 BURY METRO RCC |
#1565
|
||||
|
||||
Yes there are 3 silver screws that can be used to mount the esc. There's no "best" way just your choice of good ones
__________________
Tekin Team Manager |
#1566
|
||||
|
||||
|
#1567
|
||||
|
||||
Hi Ivan,Ray will bring it on Sat,I wont be there,I will leave it soldered to the Teken motor,all you have to do is connect to a battery..Its under model number 4 on my Tranny..I will see you Sunday at racing,hopefully with some good news..Thanks for your help mate.Regards Tony.
|
#1568
|
||||
|
||||
You'll need a booster to get it to work with 1S.
This: http://www.rcdynamics.co.uk/Booster.html The Rolls Royce booster or this: http://www.hobbyking.com/hobbyking/s...r_for_BEC.html cheap as chips booster. The HK cheapo one worked fine for me.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#1569
|
||||
|
||||
Hmmmmm, not good, cheers DCM!!!
|
#1570
|
||||
|
||||
its a 2s
Ill be at the track all day Saturday and Sunday. Between meself and Ivan we should get it up and running. |
#1571
|
|||
|
|||
[QUOTE=kartstuffer;772483]Hi tony
Bring it with you on Saturday and I will run through it all with you,have you a Hotwire. I found before with another esc that it was the radio not set at zero trims etc that can stop the esc arming.?[/QUOTE] yes.... I had to set it back to zero for it to pick up / arm Quote:
I use double sided tape to mount mine Quote:
__________________
[CENTER]TKRrc[/CENTER[/URL]] |
#1572
|
||||
|
||||
1s requires a booster or receiver pack? Which are you using?
__________________
Tekin Team Manager |
#1573
|
|||
|
|||
this is my oldest ESC, raced it for years, .. and now does strange things, looses power, makes the engine get very hot, even destroyed an BL engine
san diego auto accident lawyer |
#1574
|
||||
|
||||
@firetian I need more info than this to help.
What motor exactly? Esc setup? Radio system? Battery? etc.
__________________
Tekin Team Manager |
#1575
|
||||
|
||||
@firetian I need more info than this to help.
What motor exactly? Esc setup? Radio system? Battery? etc.
__________________
Tekin Team Manager |
#1576
|
|||
|
|||
I wont be there,I will leave it soldered to the Teken motor,all you have to do is connect to a battery..
dental implants phuket |
#1577
|
|||
|
|||
|
#1578
|
|||
|
|||
|
#1579
|
||||
|
||||
5.5 gen2 in buggy
Hi Randy and fellow tekin users, Ive got to the point where Im pushing my redline 6.5 to the max outdoors and could still do with a little more punch in infield and speed down straight. Im running sensored, roughly 16 timing on can and 30 boost on esc. Any more and I'll be thermal.
Would I get a little more from the gen2 5.5 you think? I dont want to go dual on it really as my 6.5 feels like a snail now in dual mode Thanks. Likely ordering tomorrow regardless but would be nice for some feedback too. |
#1580
|
||||
|
||||
hi,
my tekin RS is doiing wierd stuff : i updated to the latest 238 software and it got stuck it took me 5-6 update tries to get it recognised and connected on the hotwire/pc again, eventually it connected. after that it was working, except for the speed : it's making the car run at least half the speed compared to before the 238 update with exactly the same settings and engine i'm running a tamiya 17t sensorsless engine on a touring chassis so the esc was setup in dual mode, timing advance max I did notice that the start and end RPM displayed with a few digits missing eg. 20000 became 2000, 8000 became 800 in the display this was also very wierd So shall I revert to the previous update of the esc software? Is my tekinRS faulty ? why ?
__________________
click here to follow me on facebook |
|
|