|
#1
|
|||
|
|||
Atomised B44 starting set up for stotfold
Could someone post a starting setup for a AC B44 stotfold please.
Thanks |
#2
|
||||
|
||||
Has anyone actually run an AC B44 there yet?
|
#3
|
|||
|
|||
Translate this onto an Atomized B44
http://atomic-carbon.gforceimages.ne...15-06-2007.jpg then make the following changes 40wt front oil 35wt rear oil orange rear pistons pink rear spring outside hole for front shock on wishbone middle hold on front tower (shock) #1 on rear tower (shock) the inner camber link location used is the B44 'inner' both front and rear outside hole on the B44 front caster block for the camber link that should be about right if its dry, if its wet drop 5wt on oil all round. |
#4
|
||||
|
||||
Chris is this what you finished on @ Southport ??
|
#5
|
|||
|
|||
Pretty much, but I will hopefully be using all 4 driveshafts unlike most of the runs at southport
|
#6
|
|||
|
|||
Ok thanks Chris
|
|
|