|
#1
|
||||
|
||||
Gearing help
Just got my pb cat and wanted to know what pinion is right using stock spur and a losi xcelorin 6.5 and im also using lipo "dont know if that makes a difference"
cheers steve
__________________
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car. |
#2
|
||||
|
||||
The little time I´ve spent with the car, I´ve been using stock spur and 23 pinion. The motor and ESC seem to be a bit more warmer than normal. Now I installed 21 pinion and have to test it out.
__________________
Rc-Iberica Driver KYOSHO RB5 Sp2 XX-cr, goldtub RC10, Ultima PROII and many more weird rides |
#3
|
||||
|
||||
23 pinion sounds about right. 21 would be quite undergeared.
If it is getting hot, then open up the vents, cut the rear of the shell a little so air passes through and can exit the shell. BUT they do get hot, don't be alarmed as long as it can last 5-6 minutes. Mine regularly smells like its on fire. |
#4
|
|||
|
|||
23/83 on a good quality 6.5 is spot on for most brands of motors.
They do get hot, but nothing dramatic And NEVER undergear a sintered BL motor. |
#5
|
||||
|
||||
I am just stepping up from stock 13.5, to an 8.5 Tekin.
With a 8.5 would I have to increase the pinion size from what has been recommended here? Say 24 / 83?
__________________
Rango St Ives |
#6
|
||||
|
||||
Thank you very much guys, I´m going to 23 again.
Gaerno, as faster the motor smaller the pinion. 24 should be ok.
__________________
Rc-Iberica Driver KYOSHO RB5 Sp2 XX-cr, goldtub RC10, Ultima PROII and many more weird rides |
#7
|
||||
|
||||
Thanks, yes a good tip.
I asked craig to add the Cat SX to his list, on his motor chart. he did which is awesome. He also added the FDR figure as well. Really cool guy. Not sure what the box stock internal ratio is, 2.4, 2.6, 2.8? http://www.comeseethis.com/gearing.p...=83&Variance=3
__________________
Rango St Ives |
#8
|
||||
|
||||
WOW What a chart buddy!!!! Thanx a lot, that´s a MUST...
__________________
Rc-Iberica Driver KYOSHO RB5 Sp2 XX-cr, goldtub RC10, Ultima PROII and many more weird rides |
#9
|
||||
|
||||
I think it is 2.6, I built the car last night and counted the teeth
Just let your mate know that he doesnt have the options in correctly for the CAT, he has it down as 2.5, 2.6 & 2.7 Quote:
|
#10
|
|||
|
|||
sorry, what is the standard internal ratio and spur for the stock cat?
Cheers cAp |
|
|