|
#1
|
||||
|
||||
![]()
The Kit Spur is 87Tooth 48Dp.
What would be the range I should be looking between for a 13.5T? The LRP 13.5T Eraser Brushless Motor guide says I should have a ratio of 6.0:1 for 1/10th TC and that means a 29 48Dp Pinion. but I can't find anything official from TC5R manual online etc...... or on the AE website. but on all the forums people talk about 4.0:1 ratio's????? Thats a 43T Pinion? Where do I start? ![]() |
#2
|
|||
|
|||
![]()
I ran 29/87 when running the LRP Eraser 13.5 in my TC5.
Matt |
#3
|
|||
|
|||
![]()
did u run that in or out door?
thanks mike
__________________
Quote: Originally Posted by Gibsy That well cheap mike how is it cheap with no prices ![]() pwnd |
#4
|
|||
|
|||
![]()
Indoor at Newbury RC Car Club
Matt |
#5
|
||||
|
||||
![]()
OK, this is redundant as I just bought the XRAY T2 009 EU Rubber-Spec
|
#6
|
|||
|
|||
![]()
Just interested, why did you swap cars? I've got a TC5, wonder whether it's time to change or not.
|
#7
|
||||
|
||||
![]()
Hadn't bought the car yet: was convinced by club members to buy the T2, parts very expensive though.
|
#8
|
|||
|
|||
![]()
Ah. That's the good thing about the TC5 - they don't break and spares are cheeeeeaapp. They don't handle either but that's by the by.
|
![]() |
|
|