|
#1
|
|||
|
|||
Bj4 pics
Just picked one up and have been cleaning it and rebuilding it so far, but it looks different with gold aluminuim on it and arms Anyway I just want to see pics of yours to get an idea compared to myn...Thanks Derek
|
#2
|
|||
|
|||
Can you put some pictures up? We'll be able to let you know whats different, by the sounds of it any gold bits are non-stock, also aluminium arms are different and should be changed ASAP.
The pictures of the red car in the other thread look like it's 100% stock |
#3
|
|||
|
|||
got them up what do you guys think...as you can see still putting it together for cleaning. Post yours up guys!
|
#4
|
|||
|
|||
That's standard apart from the alloy arms and wierd looking battery posts, the gold bits are the standard parts but anodized
|
#5
|
|||
|
|||
So its good then? Also my cvds look like they are going to pop out lol is that how they are made...meaning they site at the edge of the drive cup? Post pics of your bj4's guys
|
#6
|
|||
|
|||
You should have one droop limiting plastic washer inside the rear shocks, the fronts you run without. The rear's will be close to the edge of the outdrive but they won't pop out as everything is so stiff.
|
#7
|
|||
|
|||
is that the white round piece in the shock? Did i score good with this bj4?
|
#8
|
|||
|
|||
anyone? Opinions? Lmk what you guys think
|
#9
|
||||
|
||||
the car is fine, you just need to replace those alluminium arms to original plastic ones! get it set up and hit the track
|
#10
|
||||
|
||||
I have to agree with the above post. Great Chassis. I still run my one indoor and outdoor. But replace the arms to the plastic ones
Enjoy your ride
__________________
Team Associated B4/Novak 10.5 JConcepts BJ4/Mambe 5700Kv Ofna Hyper 7 PBS/Axial .28 Tamiya EVO-IV/10.5 Drifter HPI Sprint-2/13.5 Rubber Spec Tamiya TB-02/Black Can Spec |
#11
|
||||
|
||||
Here are my pics of my BJ4 original. Have a Castle creations sidewinder and 5700Kv motor in it but will probably switch to a Novak system for next summer. Chassis is also a bit (Very slightly) twisted so I have a spare on the way. Run it on a large dry, dusty, blown-pout track out doors. 35W oil w/blue springs up front, 30W oil w/green springs in the rear. No major hop-ups at all. This buggy still runs fine for its age and is competative at a club level
__________________
Team Associated B4/Novak 10.5 JConcepts BJ4/Mambe 5700Kv Ofna Hyper 7 PBS/Axial .28 Tamiya EVO-IV/10.5 Drifter HPI Sprint-2/13.5 Rubber Spec Tamiya TB-02/Black Can Spec |
#12
|
||||
|
||||
Heres my BJ4, as can be seen in the mini corespondence I made in this section.
Loved this car to bits, quite gutted I got rid of it! Absolute tank and went like stink! |
#13
|
||||
|
||||
Hey Paul.
I thought I recognized that shell. Are you using one or two front shock towers? What a buggy. I remember trying to decide on a 4WD buggy that used a stick pack and this seemed the obvious choice. I love it I think I will try the solid shaft instead of the one way this season
__________________
Team Associated B4/Novak 10.5 JConcepts BJ4/Mambe 5700Kv Ofna Hyper 7 PBS/Axial .28 Tamiya EVO-IV/10.5 Drifter HPI Sprint-2/13.5 Rubber Spec Tamiya TB-02/Black Can Spec |
#14
|
||||
|
||||
Here are my pics of my Bj4 WE, But will race a Bj4 original next year in the Danish championship......
__________________
Team KBracing Konrad Berger Denmark Push the limits of PERFORMANCE with Team KBRacing MCD W5XL RN Tuning / R1 29ccm. Nano-tech Lipos. ST. JX servo. TH. JX servo. Sanwa MT-44 Radio. |
#15
|
||||
|
||||
LOL, I just paid baout $85.00USD (including 5 day shipping) for a new chassis for my original BJ4 off the Jconcepts site and I noticed they have the original kit for $300.00USD. Man, I could have just shelled out the extra 215.00 for the whole thing
__________________
Team Associated B4/Novak 10.5 JConcepts BJ4/Mambe 5700Kv Ofna Hyper 7 PBS/Axial .28 Tamiya EVO-IV/10.5 Drifter HPI Sprint-2/13.5 Rubber Spec Tamiya TB-02/Black Can Spec |
#16
|
||||
|
||||
I just order one for $300.00USD, for next year.......
__________________
Team KBracing Konrad Berger Denmark Push the limits of PERFORMANCE with Team KBRacing MCD W5XL RN Tuning / R1 29ccm. Nano-tech Lipos. ST. JX servo. TH. JX servo. Sanwa MT-44 Radio. |
#17
|
||||
|
||||
this is my bj4we it runs an LRP sphere speedy novak 6.5r motor ace servo and spektrum dx3 radio and reciver the battery's i use are team intergy 4300mah scells
and this one is my mate bj4we it runs hobbywing 120a speedy speedpassion 6.5r motor kopropo pds-2365ics servo and futuba 2pl 2.4g radio and reciver the battery's he uses are 4300mah scells
__________________
BJ4WE / LRP SPHERE / NOVAK 6.5R / SPEKTRUM |
#18
|
||||
|
||||
Ya, New Chassis just came in the mail from Jconcepts for my original BJ4. A bit pricey, but well worth it
__________________
Team Associated B4/Novak 10.5 JConcepts BJ4/Mambe 5700Kv Ofna Hyper 7 PBS/Axial .28 Tamiya EVO-IV/10.5 Drifter HPI Sprint-2/13.5 Rubber Spec Tamiya TB-02/Black Can Spec |
#19
|
|||
|
|||
Brown front springs and long front camberlink?! That must have mad steering
|
#20
|
||||
|
||||
Quote:
Been considering another for when funds allow! |
|
|