|
#1
|
|||
|
|||
![]()
Im new and struggling, anybody got any setups for worksop indoor please.
cheers phil. ![]() |
#2
|
||||
|
||||
![]()
Hi Phil
I think you go to Louth club ? My B4 FT is set as follows Plastic chassis Silver springs all round 35 WT oil front no2 piston 30 WT oil rear no1 piston wishbones level at front driveshafts level rear gearing 23/81 on Novak 7.5L Lipo mounted towards the front ( foam pushing it forward ) I also run 30 degree castor blocks with one washer under the ballstud for the inner ink. Trishbits brass blocks front and rear, lead under lipo. I managed 4th in the B using the above setup with a bit of slipper advice from Mick Cragg ( Thanks Mick ! ![]() You`ll love the racing, just dont expect to do any good cos the standard there is incredible. That should get you somewhere near ![]() |
#3
|
|||
|
|||
![]()
Thanks for that mate, will be a great help to get me started. was struggling for front end grip on sunday, but was a great day. See you at Louth after xmas or worksop on the 3rd. cheers phil
![]() |
#4
|
||||
|
||||
![]()
No worries Phil - they all understeer on power, thats the nature of the beast, its a matter of discipline with the throttle. Easier said than done though
![]() Have a good Xmas. ![]() |
![]() |
|
|