|
#461
|
|||
|
|||
Last edited by footey; 14-01-2011 at 01:40 PM. |
#462
|
|||
|
|||
Tresery complete, VERY NICE!
|
#463
|
|||
|
|||
have you tried it yet?
|
#464
|
|||
|
|||
yep and from the current setup, i went to the Kinwald setup.
From my first Durango (2009) the ball cup are more heavy duty but i had some issues 2 or 3times with the new one. The CVD pin still unscrewing, so now my CVD have all 2 screw to retain the pin and secure. I m very happy with this setup, i prefere the plastic side on dirt and alu side on carpet. Next evo is the carbon fiber chassis and go down 1500gr and cut the rear brace to add small shocks. |
#465
|
|||
|
|||
"cut the rear brace to add small shocks"
What do you mean???? |
#466
|
|||
|
|||
1500g ?
|
#467
|
|||
|
|||
Difficult to explain without image, i want to give more flex to the alu side pod without removing rigidity.
So to do, i plan to cut the rear brace where normaly you put the weight in each side and then add micro shock with limiter to allow 4mm of flex. 1500gr is my idea haha i dont think is possible |
#468
|
|||
|
|||
I'd be worried that with a carbon chassis the centre of gravity would shoot up and it would be less manageable in the air. I know I'm going to talk myself into a carbon chassis but I do like the alloy. I may get it for the dirt.
|
#469
|
||||
|
||||
Here are my freshly painted shells, from Kifo with custom stickers to match.
Thanks to my Sponsors: Kifopaint- www.kifopaint.com RC Sure-Start- www.rcsurestart.co.uk |
#470
|
|||
|
|||
Awesome!
What is special thing about the white plastic parts at your turnbuckles? |
#471
|
|||
|
|||
Quote:
Looks like he replaced the std Durango ball cups with rpm white ones |
#472
|
||||
|
||||
That body looks unreal jamiekerr14. Carbon looks great.
|
#473
|
|||
|
|||
OK, but RPM Homepage says that they are only working with Lunsford Turnbuckles, correct?
|
#474
|
||||
|
||||
JConcepts + Shui ball studs
Thanks for the kind words guys, all the praise goes to Kifo unfortunately! Yeah, I still need to get 4 mall ball studs to finish them all off. But did all the one's that will be most likely to pop off ect. A friends uses the same setup and has had no issues with over 6 months use.. Few more-Before Sticker's: |
#475
|
|||
|
|||
|
#476
|
||||
|
||||
Quote:
|
#477
|
|||
|
|||
OK, Thanks!
So i just can use them without changing anything else, right? I mean this ones: 73372 Heavy Duty Rod Ends (12) 4-40 (Black) 73375 Heavy Duty Rod Ends (12) 4-40 - Blue 73377 Heavy Duty Rod Ends (12) 4-40 - Yellow 73378 Heavy Duty Rod Ends (12) 4-40 - Purple 73381 Heavy Duty Rod Ends (12) 4-40 (White |
#478
|
||||
|
||||
Ball Cups-http://www.m-k-racing.com/product_info.php?products_id=4357
http://cgi.ebay.co.uk/U3496-SCHUMACH...item27b7cdcda5 http://cgi.ebay.co.uk/U3497-SCHUMACH...#ht_1492wt_907 Those are where I got mine from buddy. As some shops, only had 1 short and no long.. and vise versa |
#479
|
|||
|
|||
Quote:
But where should i use the long and where should i use the short ones somewhere? I mean the studs... ?? |
#480
|
||||
|
||||
Here is mine nearly ready pics attached or should be.
__________________
2002, 3 , 4 B.R.C.A Scottish indoor TC champion. 2005......... B.R.C.A Open modified Scottish TC champion. 2011....... Scottish Indoor OFF-ROAD champion. 2012 ......... Scottish SORC Off-Road Runner up. My oOple Trader feedback http://www.oople.com/forums/showthread.php?t=84630 |
|
|