|
#121
|
|||
|
|||
I stripped the rear end to rebuild the diff etc and noticed that if i swapped the rear arms left to right it lengthens the wheel base slightly. With the hype about lengthened wheel bases on the B4.1 at the moment i posted up to see who might have done this before. Turns out a couple have and it is much more stable on high grip surfaces. I have only ever run it on Astro, and the first time tomorrow with the shocks at the front of the tower, so fingers croseed
|
#122
|
||||
|
||||
This is my Ansmann Racing X2:
|
#123
|
||||
|
||||
Hi Tom3012,just been looking at your x2c and was wondering if you've put many hop ups on it,or is it essentially the kit as it comes.
I see in an earlier post you mentioned the slipper was different. Im thinking of getting one as im on a small budget and for the price it looks a pretty good car. |
#124
|
|||
|
|||
It sure looks great, a simple but clean painted body. I'm looking forward to get my X2TE.
|
#125
|
|||
|
|||
|
#126
|
|||
|
|||
my mad rat
spec at moment savox 1251 hobbywing 120a esc novak 10.5t soon to be speedpasion 7.5t losi shocks ansmann rubber sealed bearing schumacher tyres ansmann adjustable turnbuckles and a awsome painted shell hope you lot like it |
#127
|
||||
|
||||
Hi all,
Can you fit a turnigy saddle pack in a mad rat? I have two and am still undecided between an x2 And an x2c! Thanks |
#128
|
|||
|
|||
thought i would resurrect this thread hers my x2c
|
#129
|
||||
|
||||
Yours makes me want one even moooorrreee!
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#130
|
||||
|
||||
What reciever is in your X2C ? It must be tiny in order to fit lengthways in the chassis like that. The Ansmann W5 reciever of mine measures 22mm x 35mm & that won't fit the way round yours is.
Nice neat installation there.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#131
|
|||
|
|||
there's a trick to that it is a r5 take the case apart and root the aerial out the side of the case then cut the old Nobble of the end of the case then it fits
|
#132
|
||||
|
||||
is anyone running a speed passion gt2.0 lpf in their x2c???
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#133
|
||||
|
||||
Speedo
I run the new Orion vortex speedo in mine and I had to dremmel a section of the chassis away to get it to fit the way I wanted.
I think the speedpassion speedo is bigger so good luck. Dave
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#134
|
|||
|
|||
no but if its space your worried about i'm sure if you got it in a 22 it will fit a x2c
|
#135
|
||||
|
||||
Funny you ask as i've just spent half the evening re-arranging my installation to squeeze my r5 reciever in, lol.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#136
|
||||
|
||||
Does anyone know how long you need the sensor cable for the x2c?
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#137
|
||||
|
||||
The one in the last pic above is approx 200mm long.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#138
|
||||
|
||||
will a 150mm be long enough?
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#139
|
||||
|
||||
Should be ok, if i measure 150mm forwards from the senser plug on the motor it comes to the middle of the servo. Just depends how you want to route it i guess.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#140
|
||||
|
||||
Thanks for your help
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
|
|