|
#1
|
|||
|
|||
Sx3 gearing for 6.5
Anyone know roughly what gearing for a sx3 with a 6.5 motor?..
|
#2
|
|||
|
|||
I wold start with a 20 do a 5 min race then see if its got hot if it could still slowly go up 21 and so on but you shouldn't need to go past say a 23 ? Hope this helps
|
#3
|
|||
|
|||
I presume that's with an 83 tooth spur? I also have a 76 tooth spur, what pinion would I start with with that?
|
#4
|
|||
|
|||
Wot ever one comes with the car as Standerd mate think its the 83
|
#5
|
|||
|
|||
Cheers, what effect would using the 76 have? More top end or more acceleration? I can't remember which way around it is
|
#6
|
||||
|
||||
I did run 83/21 whit my sx3 and Noak 6.5 motor. No problem and good speed.
Edit: it was 81 spur gear on my sx3.
__________________
LD, L1, Mi7 |
#7
|
|||
|
|||
If would be faster top end with a smaller speir gear
|
#8
|
|||
|
|||
So if I ran the 76 spur what pinion with 6.5 should I start with? 20 aswell?
|
#9
|
|||
|
|||
With a 76 I would start with a 18 and go up from there
|
|
|