|
#1
|
|||
|
|||
Hyper h2 pro, first purchases
Hello, sorry for my english, but I use google translator.
I bought a hyper h2 pro, you soon will come to me. esc 120A(Hobbiking X-car 120A) I run on carpet and I wanted to buy a 7.5T motor (Turnigy Tracstar 7.5T or is it better another, maybe a 10.5T)? Such as batteries, I do not know what to choose, because I do not know the space of the battery compartment. http://www.hobbyking.com/hobbyking/s...APPROVED_.html or http://www.hobbyking.com/hobbyking/s...APPROVED_.html or http://www.hobbyking.com/hobbyking/s...APPROVED_.html or http://www.hobbyking.com/hobbyking/s...ddle_Pack.html I wanted to buy from hobbyking . com (Turnigy nanotech), I recommended the batteries most appropriate? Can you help? Thank you. Ps. tires that I will use: Shumacher minipin yellow |
#2
|
||||
|
||||
if you have never raced before then the 10.5t will be the better motor
the car itself is very strong but I would upgrade the rear drive shafts. on carpet schu yellow minipin will be fine on the rear but I would run a yellow 2wd minispike on the front as in mid motor form the car has a lot of steering. for in doors I usually run 4wd fronts stretched on to the rear to reduce rear end grip and allow the car to pivot more in the corners.
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#3
|
|||
|
|||
In my indoor track (carpet) make a lot of races and I would like to participate.
I would not be last with a motor 10.5T. I do not know the difference between 7.5 or 10.5T motor. The straight line is not more than 10 mt. The problem are the batteries, who can help me? |
#4
|
||||
|
||||
Just FYI the driveshafts have now been updated and have a 1.5mm pin instead of the 2mm pin so are much stronger
Losi 22 drive shafts/pins are a direct fit to the H2 if you prefer |
#5
|
|||
|
|||
I get an answer too? I have orders on hobbyking open, and I would like to close it.
thanks |
#6
|
||||
|
||||
All of the batteries you have listed will fit the H2
I use a shorty pack in my H2 as do quite a few of the team drivers The good thing of you go for the saddle pack you can use this in a 4 wd too in the future |
#7
|
||||
|
||||
This is a great starting set up for indoor carpet, use mini pin rear and cut stagger front tyres from schumacher in yellow compound
http://www.cmldistribution.co.uk/pro...hil-Sleigh.pdf |
#8
|
|||
|
|||
great, so I confirm this?
http://www.hobbyking.com/hobbyking/s...APPROVED_.html or this: http://www.hobbyking.com/hobbyking/s...APPROVED_.html I hope you have evaluated the absorption of my engine: http://www.hobbyking.com/hobbyking/s...or_5135KV.html I promise, do not get annoyed after anymore. |
#9
|
||||
|
||||
Yes all of the battery/motor listed will be fine in the H2
I would go for the shorty pack myself |
#10
|
|||
|
|||
really thank you.
|
|
|