|
#1
|
||||
|
||||
Shorty Lipo in a 22 2.0 ?
Hi all
Can anyone one tell me what's the best way to fit a shorty lipo in the 22 2.0 please ? Car is in mid motor format , I'm using a full size savox1256 the servo , vampire sr1+ speedo & spektrum micro receiver I've also got an avid adjustable lipo stop I can use if it's possible Pics would help too please ?? Thanks in advance Graham
__________________
Associated B6.1 & B74.2 Lots of bling bits Reedy electrics KO Propo Espirit 4 stick radio Dji Mavic Air2S All round gadget freak ! |
#2
|
||||
|
||||
Quote:
I have the shorty in mine mate.But i use the low profile servo which gives you a bit more room in front.I have my speedo and and rx near the motor,which leaves about 15 mm of movement for the lipo for and aft so you can alter the weight distribution.
__________________
Corally SBX410 Associated B6d Tamiya M05 Tamiya M06 low rider pumpkin TLR 1.0,3.0 scte Yeldnips racing products Xfactoryuk Dms racing Corally uk |
#3
|
||||
|
||||
Cheers Mick , yes the larger servo makes all the difference I think , I've been dremelling and tinkering and I think I've sorted it , combination of the rear battery holder , avid adjustable tray and some imagination !!
I'll take a couple of pics later when I'm back in my workshop !
__________________
Associated B6.1 & B74.2 Lots of bling bits Reedy electrics KO Propo Espirit 4 stick radio Dji Mavic Air2S All round gadget freak ! |
#4
|
||||
|
||||
Came up with this solution , will allow me to move the lipo back about 10mm or forward about 10mm if needed when the receiver goes in , quite pleased overall , just need a nice little custom made carbon battery strap I think !
__________________
Associated B6.1 & B74.2 Lots of bling bits Reedy electrics KO Propo Espirit 4 stick radio Dji Mavic Air2S All round gadget freak ! |
|
|