|
#221
|
|||
|
|||
yes, diff is locked (on power) with the front oneway. the oneway bearing is inside the the pulley.
|
#222
|
||||
|
||||
Tamiya part 54425 (x 2)?
__________________
Tamiya America - Trakpower - 92Zero Designs |
#223
|
||||
|
||||
Yes.. you will need two 54425 since one of the Outdrives is longer that the other... you will need the short side.. if you wanted to loose a little more weight and save some wear and tear on the outdrives you could also use 51469 x2 as well..
I have a whole bunch of other stuff that I have been test fitting and finding out what works from other cars
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#224
|
||||
|
||||
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#225
|
|||
|
|||
What are thos blue washers between tjhe upper shock mount bush and teh shock tower? Are they a Tamiya Part?
__________________
- TRF201XR - - TRF503 - - TRF801xt - |
#226
|
||||
|
||||
Yes they are
Part # 53873
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#227
|
|||
|
|||
So, how are we all planning on protecting the lovely alloy chassis from scratches, scrapes, etc?
I have (maybe rather foolishly), already cut up the undertray and mounted the side sections as per the manual. I plan on using the Proline Phantom B44.2 body, which is narrower than the full undertray anyway, so wouldn't have been able to use the full cover. Replacement Tamiya undertrays (#54133 TRF511 body & chassis fairing) don't seem to be too readily available either. Ideally, someone would produce a pre-cut protective sheet for the chassis, with screw holes. They are available for other buggies, but as the 503 is so new, it could be some time before they are available. I have some carbon-effect vinyl A4 sheets that would offer some protection, but then there wouldn't be any screw holes without a whole lot of precision cutting being required... |
#228
|
|||
|
|||
Gents
Will I be able to fit normal size servo in a TRF503??Or just low profile is an option?? Thanks |
#229
|
|||
|
|||
yep you can use std servo. and theres still room left for a small receiver.
|
#230
|
|||
|
|||
I have Futaba R614FF-E, quite small, we will see in a week
Thanks |
#231
|
||||
|
||||
I'm using a JConcepts standard blank chassis protector sheet on the bottom of the 503.. it's pretty thick and durable... I use it on my other buggy and has lasted over 30 plus practice and race days with out any issues of ripping
Now for the 511 lower chassis protector.. I am only using a small section of it and it will just the back section near the battery trays moved in close as possible and then use Velcro to mount the body and they use the front body mount posts.. it you use the rear mount post they tend to rip a hole in the body since there is really not too much mount too back there.. so I just turn the rear body mount upside down and use the mount as a stopper and let the Velcro in the back hold the body down Quote:
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#232
|
|||
|
|||
Chassis protector
Do you have the part number for the chassis protector please?
|
#233
|
||||
|
||||
Last edited by MHeadling; 12-04-2014 at 04:53 PM. Reason: Link |
#234
|
||||
|
||||
Here is the JConcepts part# for the clear sheet chassis protector.. they come with 2
JCOC1155
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#235
|
||||
|
||||
Dave, do you have list with nr of THE spaties you bought?
Where can I find THE blues crews Cheers |
#236
|
||||
|
||||
I do... I have a list of part #'s up later today
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#237
|
||||
|
||||
Tamiya 54449 RC Protective Sticker (Hard).
|
#238
|
||||
|
||||
what's the part number for the front ally hubs?thanx
__________________
TRF416 TA05MS F104 TRF503 TRF201XMW TRF203 |
#239
|
||||
|
||||
10 degree: 53961
12 degree: 54063 |
#240
|
||||
|
||||
witch one I should start with ? 10 or 12 ? What are the stock one ?
__________________
TRF416 TA05MS F104 TRF503 TRF201XMW TRF203 |
|
|