|
#121
|
||||
|
||||
These new stronger bulkheads are available via smd in the UK too, the firebolt is an awesome car that works well on all surfaces, even on high grip carpet I've equalled or bettered my results from my previous team c TM2.
The car is a brand new design from the ground up and teething problems happen from time to time, vbc have worked quickly to get the issue sorted, something for which I think they should be applauded
__________________
John Jones --SMD--INSIDE LINE MODELS--PR RACING UK-- My feedback http://www.oople.com/forums/showthread.php?t=79696 |
#122
|
||||
|
||||
Vbc
i ran my vbc firebolt today and yet again I can not fault the stock default setup
I was lucky enought to have another spare firebolt to run in the 4wd class Which I have fitted a carbon chassis and tried a different setup , by the end of the day to get the car going well I was back to the stock default setup with both cars apart from the carbon chassis on the spare car. I had the fasted qualifying time and won the A final but .4 off the fastest lap I believe the car can go faster over 1 lap but until I find that setup, consistency will have to do to win. i have now run my vbc for about 6 months now and have not broken any part at all on the car |
#123
|
|||
|
|||
Did you prefer the cf or the aluminum chassis?
|
#124
|
||||
|
||||
Chassis
The track had some very high grip part and some very low grip parts to the track
So was very hard to tell which was the best , I was quicker with the alloy chassis car but I have been running this car for 6 months and it was the first run with the cf chassis car and I was messing with setup all day Where the alloy chassis car I didn't change as it was going mint (stock setup) I will be testing the cf chassis car again this weekend with some crazy set up just to see what it does. Last edited by jk007; 19-01-2015 at 10:37 PM. |
#125
|
|||
|
|||
Any advice on a carpet setup guys?
I've had mine on a kit setup for a while, and it has been running OK on yellow low-profile cut staggers on the front with yellow mini spikes on the back. After being assured that mini pins on the rear would actually be better, I changed them but then struggled for front end grip. The surface was indoor, multi type carpet with some wood. Generally flat with some low jumps/ramps/rollers. Changes from kit setup now I'm running the pins are; - longest front links - 40wt oil in front shocks - top outer damper mounts - middle lower damper mounts Found it turned in slightly better with the dampers back in the middle hole on the tower, but I ran out of heats to meddle. It was much more stable on the wooden parts with the outer top mounts. Initial bite doesn't seem too bad, but then with either a tiny bit of throttle or whilst coasting, the mid to exit of the corner just washes wide. Any suggestions?
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
#126
|
|||
|
|||
How much caster do you run? I read somewhere that running 20° can help a lot on smooth tracks, but could not try it myself yet.
|
#127
|
|||
|
|||
Can't remember which way the manual tells you to build it now....will check!
Haven't checked on the gauges, but from the manual it looks like it'd be 25deg caster
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade Last edited by Cliveyp; 26-01-2015 at 11:07 PM. |
#128
|
||||
|
||||
Setup
Hi mate
personally I would run mini pins all round and run stock setup This would be the best setup to start from. Cheers Jason |
#129
|
|||
|
|||
I did have a pair of front pins ready to try but just ran out of time to do it......is that the secret combination that differs to other 2WD cars then??
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
#130
|
||||
|
||||
Tyres
Quote:
some people like to run different options it's all about preference. I would try them and see what happens. Let me know Cheers Jason |
#131
|
|||
|
|||
Ok, I'll give them a go. It won't be for a while anyway as I have a number of family things coming up that will keep me away. On the whole, I would say 95% of the 2WD on this track are using cut staggers and rear pins, and the majority have significantly noticeable more front end grip, especially the KFs and XB4's.....a shame that I can't make this do the same!
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
#132
|
|||
|
|||
Using a stiffer rear shock set-up might help to reduce weight transfer to the rear, e.g. go down to 1.6 pistons and use harder springs. Reducing front droop or rear toe-in may also help. Increasing anti-squat also springs to mind... Oh, and you could try to move your front caster blocks into the rearmost position.
Last edited by mes; 01-02-2015 at 01:02 PM. |
#133
|
|||
|
|||
Thanks mate, i'll have a look into that too.
I've only got one carpet meet left now before heading back to astro for the summer, so will do a couple of small tweaks then work on getting it right for the summer.
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
#134
|
|||
|
|||
Does anyone have any advice on what people have done to stop the weepy rear shock caps?
Last edited by K-Brewer; 02-02-2015 at 08:20 PM. |
#135
|
|||
|
|||
Shock tops
Just used some different 'o' rings (slightly thicker) someone else at club has used Schumacher 'o' rings
|
#136
|
|||
|
|||
I think ive managed to sort the shocks caps from weeping, will keep an eye on the bottom shock caps as they seem ok at the moment
|
#137
|
|||
|
|||
Quote:
I had been meaning to buy some new seals to see if that solved it, but hadn't got around to it. After a few removals and refits to top the shocks up, this (seems) to have been cured without doing anything......i'll wait to see if this is the case when I pull it back out of the cupboard later! If not, i'll try the Schumacher seals.
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
#138
|
|||
|
|||
Quote:
|
#139
|
||||
|
||||
|
#140
|
|||
|
|||
Now just to try and locate one in the UK.....
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
|
|