|
#1
|
||||
|
||||
ESC Fan
Im after a 25x25x7mm esc fan like this:
http://www.ebay.co.uk/itm/LRP-ESC-Fa...item5420a77626 Only not £11.31 Doesn't matter what brand as long as its this size and has the same connector Tarr |
#2
|
||||
|
||||
you can cut and solder the connector so could use most fans that size.
__________________
{CML Distribution} {Penguin Bodyshells} |
#3
|
||||
|
||||
Im struggling to find that size to be honest other than the LRP one I linked regardless of connector
|
#4
|
|||
|
|||
ebay
type Hobbywing fan or go on ebay.com you have it in 3 days |
#5
|
|||
|
|||
I bought some of these before: https://www.hobbyking.com/hobbyking/...dProduct=43748
Actually last longer than the original Hobbywing fan it replaced, not any noisier either. I think the connector looks the same too, but you can always cut & solder the connectors. Delivery wont be super quick, but in my experience they come between 7-10 days & at under £1 each, just buy a few to make it worth your time. I usually also buy some hex screwdrivers like https://www.hobbyking.com/hobbyking/...dProduct=11063 to make up the weight. |
#6
|
||||
|
||||
Theyre 10mm I need 7
|
#7
|
||||
|
||||
Much more do some
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#8
|
|||
|
|||
Have a look at pc components, I think they use small fans like that on GPUs.
I bought a bag of 25*25*7 fans for about 4 dollars a fan a couple of years ago. |
#9
|
||||
|
||||
I am sure we have some spare ..... i'll have a look and let you know
|
#10
|
||||
|
||||
Thanks
|
#11
|
||||
|
||||
Sorry, did look, ... I am sure they will turn up and I will let you know
|
#12
|
||||
|
||||
Ha .. it surfaced 25x25x10.5mm ??
vtec 0.16a, 4.8-7.2v 13,000rpm Will go on ebay ... perfect working order and no damage HTH Andy |
#13
|
||||
|
||||
3racing have 7mm fans.
I found some on ebay a while back |
#15
|
||||
|
||||
Very nice Ill be looking at ordering a couple of those at some point.
Don't the + and - need to be switched if using a HW esc? |
#16
|
||||
|
||||
Yes, good point, you will need to check the polarity against your previous fan, you can easily swap them round within the connector though.
Kev |
|
|