|
#1
|
|||
|
|||
The Ten4 project, in case you havent seen it yet
Here is the Ten4, a B44 and a RC10 collided and this is what it morphed into! A few parts are shapeways and the store will be open soon. The shock towers will be available from me. Robinson Racing is making the pulleys and idler gears. The rest is easily optained from your hobby shop of choice.
|
#2
|
||||
|
||||
Stunning work as always Jeff
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#3
|
||||
|
||||
Is this going to be sold in kit form. If so how much is it expected to be as the MRS can start saving now for Christmas.......
Also what will you get in the kit. Sorry if this has been asked...... Looks stunning........
__________________
http://www.oople.com/forums/showthread.php?t=83767 TRADER FEEDBACK **** 5 Metres Speed Swimming Champion 1976**** |
#4
|
||||
|
||||
It will be sold but you'll have to order the the plastics off shapeways and the rest from Jeff.
http://www.rc10talk.com/viewtopic.php?f=35&t=37839
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#5
|
||||
|
||||
Very nice, what's a rough cost to build one of these?
|
#6
|
|||
|
|||
Assuming you have nothing to start with.....all prices approximate
$199 world's kit $112 b44 and other oem parts from Tower, see list below $40 shock towers $100 shapeways printed parts $50 pulleys and idlers Prices are just estimates except I'm sure I can hit the $40 towers. The rest is out of my hands. Some may want their own take on it, so prices and items may change. TEN4 conversion kit OEM parts that you will need: (this is assuming a Champ Edition with Stealth, Team Car, or Worlds car) Front Wheels: 9767 Fr wheel (or compatible) Front Drivetrain: 3438 Low Profile 8-32 nuts 7369 Axle Pin 9647 Steering Spacers 9749 Front CVA Kit 9750 Wheel Adapter 9751 Bearing Spacers Steering: 6252 Worlds steering set (Just need pivots) Front Transmission: 3926 Diff Rebuild kit 6577 RH Outdrive 6578 LH Outdrive 6580 Diff Gear 6581 3/32 Balls Rear transmission 6565 stealth case (only needed on ReRe worlds) Rear Suspension: 6262 Turnbuckle (1.65”) Bearings: DTXC1437 3/8 x 5/8 (2) DTXC1423 3/16 x 3/8 (6) DTXC1411 5/32 x 5/16 (2) DTXC1401 1/8 x 5/16 (2) 3/16 x 3/8 Flanged (2) (may change!) Nose Plate: 6310 Nose Plate (must NOT be cut style, mostly needed for Worlds kits) __________________________________________________ __________________________________________________ __________________________ As of June 21, 2015 these parts total $111.40 from Tower Hobbies without nose plate, coupons or shipping All Parts can be sourced as needed from other manufacturers |
#7
|
||||
|
||||
Ok lovely. The Mrs can now start working over time.....
__________________
http://www.oople.com/forums/showthread.php?t=83767 TRADER FEEDBACK **** 5 Metres Speed Swimming Champion 1976**** |
#8
|
||||
|
||||
Awesome,
__________________
XRAY xb4, xb2, Carisma gtb, Vintage..... FTD Hotshot, Supershot, SWB cat, Procat, Bosscat, Cougar 2, Cat2000, cat3000, rc10 worlds, rc10 Graphite, yz10, xx4, cougar 2000 fabix, PB Maxima, mini mustang, Bigwig, Frog, and counting... Penguin Custom Bodyshells Team xray |
#9
|
||||
|
||||
Looks good, almost identical to the mip design
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#10
|
||||
|
||||
Nice. Btw, on the second picture, it seems the front belt pulley gets pulled a little back and seems to make a little angle, due to belt tension?
|
#11
|
|||
|
|||
Pulleys are just sitting there in the pic with no idler or shaft. Prototype pulleys are in the mail from Robinson Racing so I'll update soon
|
#12
|
||||
|
||||
Ah, I see. I was already wondering why the belt wouldn't start jumping off the pulley, as it was angled like on the picture. But if part is a mock-up, it makes more sense.
You have good contacts @ Robinson, it seems. I once asked them for a pinion with 3.2mm hole instead of 2mm, and that was about impossible to pull off, it would cost a lot of money. While it wasn't even a custom part, just drilling a different size hole. |
#13
|
|||
|
|||
Here are the prototype pulleys and idlers, as well as some very trick diff gears. The final versions will be heat treated and anodized.
Brian has made a quick video of his Ten4, almost ready for a shakedown on the track Last edited by gomachv; 11-08-2015 at 02:05 PM. |
#14
|
||||
|
||||
Got most parts now - just need to order the shapeways bits and I'm good to go
Thanks again Jeff! |
|
|