|
#1
|
|||
|
|||
Mardave meteor upgrade axles.
To continue the latest trend of meteor parts wanted!
I'm after one or 2 sets of the upgrade axles especially rears that fasten the wheels on with nuts, I can easily make the fronts as I did when I sheared mine racing, but the rears are too complex. Can anyone help me finish off my 2 back in the day racers? |
#2
|
|||
|
|||
You can use Cobra rear axles.
Put a long(about 12-15 mm if memory serves)M3(again,if memory serves)grub screw(threadlock it in)into the wheel reataining screw thread and use a nut/washer to hold the wheels on. Again if memory serves(he is 56 you know),you'll need a spacer on the axle between the outer bearing and the drive pin,white Tamiya nylon axle bushings fit perfectly. You'll still be inside the BRCA 10" limit for width. |
#3
|
|||
|
|||
Many thanks for that!
|
#4
|
||||
|
||||
upgrades
Hi there i have a full set almost new
Could post them out today total including trackable postage £10 Thanks Mike |
#5
|
|||
|
|||
Hi Mike its a deal! Do you only have one set or could you scrape a second together?
Is it possible to have a picture of them just to make sure they are the right ones? Many thanks Oliver |
|
|