|
#1
|
||||
|
||||
Reventon pro brakes
It's been baffling me for a while why do the brakes not work from neutral with the buggy stationery on the speedpassion reventon pro.
I've double checked with another reventon pro user and it seems to be the same on his too. Are they all the same?, and is there a way to get the brakes to work from the neutral throttle position? . Thanks |
#2
|
|||
|
|||
The motor needs to be turning for the brakes to work. So full brakes on a stationary car will give you no brakes........
Not sure what you mean about getting the brakes to work from neutral on the Tx. Unless you mean drag brakes? |
#3
|
||||
|
||||
The buggy will also not brake when rolling in a neutral throttle and then trying to apply the brakes. If that makes sense.
|
#4
|
|||
|
|||
Hmmm. Only thing i can suggest is reflashing the firmware to the ESC.
Thats fixed all my issues with Rev Pro Escs. (I have had brake issues before, they disappeared) |
#5
|
||||
|
||||
I'll give it another fresh lot of firmware and see if it helps, although i only did that recently.
|
#6
|
|||
|
|||
What level brakes do you have set? Haven't got mine to hand at the moment to see what the settings actually are.
All my buggies are packed away for the winter! |
#7
|
||||
|
||||
Brakes are set to 100%, initial brake 40%
|
|
|