|
#1
|
||||
|
||||
Gearing for 13.5t TC6.2
Hi there trying to get my tc6.2 ready for the start of the on road racing at MB models . It's currently a kit standard built roller , I'm wondering what spur and pinion you tc racers would recommend ?
Thanks in advance
__________________
|
#2
|
||||
|
||||
Boosted or blinkey?
What motor What Esc If boosted probably 6-7.5Fdr If blinky probably a spec Fdr of 5 or if its open 4.5 ish (Spur/pinion)*Internal ratio= Fdr Talk to the other drivers and get an idea what's working. Then get some laps in maybe 2-3 minutes at race pace stop and grab your motor, if you can hold on to it your ok if not it won't make 5 mins so reduce boost or increase Fdr. |
#3
|
||||
|
||||
TC6.2 internal ratio is 2:1 I.e
(84spur/26pinion)*2=6.46fdr |
#4
|
|||
|
|||
I run fdr closer to 7 at mb. Normally run 13.5 boosted but might give blinky a go this season. For blinky I'd gear around 5 I think.
|
|
|