408 Shocks on the rear?

[av4625]

i was told that all you have to do is turn the wishbones, but at standard the little ball joint that holds the antiroll bar is at the back of the wishbone and if you turn them around then this will be at the front then it will not be able to hold the anti roll bar? how do you get around this?

i no the team guys are using a new brace to put the antiroll bar on the rear but how do you do this with the anti roll at the front?

Any pictures would be much appreciated of someone that has done this already!!!

[Chris-S]

You need this: http://www.rcsupermarket.com/index.a...dotto=3597-431
The easiest way to order them is to email ordini@rcsupermarket.com and ask for Davide and pay via paypal.

You end up with the rear of your car looking like this:

[av4625]

do u have to turn the shock tower? cause if you do how to u attach the wing mount as the screw that originally comes from the front is sunk in a little?

what is the reason for turning the shock tower?

Thanks for the picture!!!

[av4625]

oh yea do u find the shocks on the rear to b a good help?

[Chris-S]

You will need to flip the shock tower so its the same as I have it in the photo. You will need to use a slightly longer screw to attach the wing mount.

I find the car to be more stable and have more rear end grip with the shocks on the rear.

[ojoloco]

You can use a front antiroll bar modified:

http://lutzinator.com/wp-content/upl...ard-Shocks.jpg