210 dogbone pin part number

[OneKiwi]

Im after the 210 dogbone pin part number, the pin that goes in the outdrives not the ones that are covered by the wheel bearing

Any help
Ive narrowed it down to these
TD310123

or these but these are only 1.5mm so don't think it can be those

[pete68]

email them and let them know that the pin as move it happen to me and they ahave sent me a new kit

[mattr]

they aren't available as a spare afaik, you just need to get a generic 2mm pin and press it in.
I've got a spare pair of drive shafts if you are stuck tomorrow.

[hloland]

They are 2.5mm and not as a spare part. You can cut these http://www.team-durango.com/part-inf...artNo=TD330041

[OneKiwi]

Ahhh bugger, but I have a few bent hing pins that I can use.

[OneKiwi]

These might work even tho they are a little long

http://www.amainhobbies.com/product_...veshaft-Pins-4

[chris_dono]

Look for "Roll Pin"

Think that's what you're after ?

http://www.team-durango.com/search.p...roll+pin&Go=Go

[OneKiwi]

NOt roll pins they are in the wheel, Im after the ones in the diff outdrives.
I have emailed TD and waiting on a response