|
#1
|
||||
|
||||
Help with Speed Passion Reventon Pro
Ok, not happy today !
Had to take a year out due to an accident. Was checking everything last night for an up coming meeting to get back into racing.. Everything was working fine, but decided to put Mod2 ( was running Mod1 ), so fired up the laptop, usb'd the LCD Programme Box, disconnected the lipo's and rx & fan plugs, plugged in the LCD rx lead into the esc, the esc then turned on by itself, now the yellow/amber light is on solid and nothing works ! The Reventon PC programme just keeps asking to connect to the esc, I hit yes, 5 sec later it asks again. Plugged everything back in when the PC is disconnected, but the yellow/amber light is solid on, the esc excepts no input from the tx, servo and pt working fine. I now it's F***ED , but what the hell has happen, can anyone shed any light ? Cheers in advance.
__________________
Schumacher Speed Passion Futaba Support from: My Back Pocket Driver - 'Derek' Feedback Link : http://www.oople.com/forums/showthread.php?t=48311 |
#2
|
|||
|
|||
Did you plug into the battery port on the receiver rather than port 1?
(Speaking from eexperience) |
#3
|
|||
|
|||
If the yellow light is on, that just indicates that is a sensored motor.
I'd be checking all the connectors/cables and trying another rx/motor/sensor cable. |
#4
|
||||
|
||||
Quote:
Matt, good advice, will rip all the kit out of my 4WD and check each one
__________________
Schumacher Speed Passion Futaba Support from: My Back Pocket Driver - 'Derek' Feedback Link : http://www.oople.com/forums/showthread.php?t=48311 |
|
|