|
#1
|
||||
|
||||
Kf bulkhead
Got a couple of kf's with striped shock tower fixings on the bulkhead , any cheeky fixes for this or is it new bulkheads .
|
#2
|
||||
|
||||
I've seen some with the back of the boss removed with a dremel and a nut fitted behind the plastic instead.
Not sure if it would be as strong but it might be an option... Wingers
__________________
Schumacher KC / KF / K1 Aero / MI4CXL - SRCMCC - Puppy Paint |
#3
|
|||
|
|||
Pilot drill, 2.5mm, though the hole and out other side at the same angle as the hole in the bulkhead. Then screw in a M3 20-25mm set screw until there is only 10mm sticking out the front. Push the tower and shock guard on, and secure with a couple of washers and nyloc nuts.
|
#4
|
||||
|
||||
Quote:
|
#5
|
||||
|
||||
If you cant get set screws and you have a dremel,use a cap head bolt
put a nut on first so it cleans the threads after..then.cut the head off the bolt,i used some red threadlock so the stud doesn't undo itself when you undo the nut..works a treat
__________________
~Rick Evans~ ~LRP~shark st ft~lwb~ ~Carisma GT14B pro~ ~Schumacher KF2~ ~Schumacher Atom~ ~BSR Basher-RallyX~ ~Ascociated RC8.2e RallyX~ ~TeamC T8EV3 RallyX~ phat bodies worm-racing http://www.mendiprcraceway.co.uk |
#6
|
||||
|
||||
Quote:
http://www.oople.com/forums/showthread.php?t=146964
__________________
I live with fear everyday....sometimes she lets me race!!!! Schumacher F1..The original KF. TLR 5.0 AC .. FORSALE |
#7
|
||||
|
||||
Cheers guys , like it .
|
|
|