|
#1
|
|||
|
|||
my durango spur gear is melting all the time
Any ideas what the problem could be?
|
#2
|
||||
|
||||
Ask captinlip
|
#3
|
|||
|
|||
Hi
I want to know about spur gear not wheels falling off
|
#4
|
||||
|
||||
Slipper too loose?
|
#5
|
|||
|
|||
Saw this on friday night. Slipper was slipping too much, and metled the spur.
__________________
Kyosho RB6 |
#6
|
||||
|
||||
could it be the slipper plates? they seem to be very hard and not gripping, on the last try i had it that tight there was no gap in the spring and i could still turn it?
|
#7
|
|||
|
|||
Thanks for the advice
Thanks
|
#8
|
||||
|
||||
If its been slipping a lot it can glaze the slipper pads and then its really difficult to stop it slipping no matter how tight you set it. Take out the pads, either turn them over or lightly rub them down with sand paper. Slightly rough pads will work much better. It needs to slip for 2-3 feet if you nail the throttle from a standstill. I always like a little slip but enough bite to pop the jumps. Hope this helps.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#9
|
||||
|
||||
Quote:
|
|
|