|
#1
|
||||
|
||||
how to convert a touring into a rally car
i was thinking of getting a touring car and convert it in to a rally car how should i do that
|
#2
|
||||
|
||||
Well you want to raise the ground clearance to a minimum of 15mm by adding longer shocks. You also want to ensure that shrapnel from the road can't come in, so make a chassis cover.
You would also need to modify the suspension arms to cope with the extra height. It's easier to buy an old tamiya ta01/02 or the mighty TB01 as they make good rally cars
__________________
http://www.thercracer.com/ |
#3
|
||||
|
||||
I was going to use a Speed Passion RS1 Touring Car and put 60mm shocks and rase the the ride height and add rally tires
|
#4
|
||||
|
||||
And I picked that car as it is cheap and so is the parts
|
#5
|
||||
|
||||
Looks like it will be a good candidate. As I mentioned before, just check the arms etc are not binding when you add the longer shocks.
__________________
http://www.thercracer.com/ |
#6
|
||||
|
||||
could always get the mighty HPI RS4 Rally..............(been discontinued a while now though)
http://archive.hpiracing.com/kits/rally/r-m.htm Ive got one begging to be rebuilt |
#7
|
||||
|
||||
hi the rs4 looks good do u know where to get one from i have looked on ebay
|
#8
|
||||
|
||||
Quote:
__________________
For Custom Decals visit http://www.graphicsbat.co.uk http://www.oople.com/forums/showthread.php?t=62298 |
#9
|
|||
|
|||
Hi,
If you look in the ansmann thread,i converted a are-2 into a rally car.....really good car for this as it has metal diffs,and telescopic drive shafts........cut a bit of the chassis away for more down droop,and put longer ball joints on the bottom of the shocks..have about 30mm of ground clearance fully extended.....its a shame there is no where in the UK that does 1/10th rallying,or rallycross......would be a good,cheap class.... cheers simon |
#10
|
||||
|
||||
Well czech guys race stage rallies and most common mods are - dremeled off droop bits on chassis, replacement of shocks for something slightly longer, dirt box and rally wheels
__________________
Retired from racing
| パベルともうします、よろしくおねがいしますスロバキア人だ、今イギリスにすんでいます。| | Ralls Racing | RCSGraphicWorx - paints, paintjobs, decals, custom wear | Schumacher Racing | Mr.O inserts | |
#11
|
||||
|
||||
200mm kit for a tc3 if you can find one, the car itself is cheap, albeit slightly old, but still makes a good rally weapon
|
#12
|
||||
|
||||
Quote:
Looks awesome drifting in a school playground with a light covering of snow Heres a rally clip.......... http://www.youtube.com/watch?v=JLY6t2L7UFU http://www.youtube.com/watch?v=T6aiw...eature=related http://www.youtube.com/watch?v=oCfyy...eature=related |
#13
|
||||
|
||||
Thanks for getting back do any of you know where I could get one from as I have had a look but I can't find one
|
#14
|
||||
|
||||
Quote:
heres one in the USA http://www.ebay.com/itm/HPI-RALLY-rs...item4cfbd9fce6 It says drifter in the listing but if you lookat the box it shows as a Rally car...............!!! heres a Yokomo MR4 Rally on ebay http://www.ebay.co.uk/itm/yokomo-mr4...item3f0ff50e1c dont take any notice being listed as a touring car as it is definately the rally car version................!!! |
#15
|
|||
|
|||
Here you go,same as mine...http://www.ebay.co.uk/itm/ANSMANN-AR...item4842b459c2.
|
#16
|
||||
|
||||
How does the Tamiya DF-03 RA rate? Might work out expensive compared to the RS-1/ARE-2/LRP Blast TC etc.
__________________
Photos: Oople Invernational 2010 - Sodden Sunday Muchmore N. Irish GP 2010 (Touring cars) BADMCC 1/8th Nitro buggies Current cars: X6^2 | JC BJ4WE | TM E4 & E4JS | HPI E-Firestorm | Losi Crawler | + many F1s, super crawlers, scalers, drifters in the works... |
#17
|
||||
|
||||
Quote:
i think it is just the origanal mr4tc in your link Heres a chance to show off mine,some of the tc parts are getting hard to find, some of the 'rally' parts are like rocking horse poo! By andypearson at 2011-11-16 By andypearson at 2011-11-16 By andypearson at 2011-11-16 By andypearson at 2011-11-16 |
#18
|
||||
|
||||
I would look for a Tamiya TB01 the only thing which made it second best to my rs4 was the weight. It was always much tougher. Now I have a brushless in one its my rally car of choice.
You can also get most parts for the tb01 quite easily... Although it doesn't seem to ever break
__________________
http://www.thercracer.com/ |
#19
|
||||
|
||||
Yeah thats definately an MR4 Rally, the rally version had a back bone which was screwed into and down the centre of the chassis which also had a clear cover protecting the belt, that and the other easiest give away is the servo location, the servo on the rally is stood upright and at an angle like in your pics...................
Rally http://www.rctech.net/forum/attachme...ar-rally01.jpg The MR4 TC (custom) had a laid down style top deck and servo was also laid down on its side with a little cut out in the chassis ............. Touring http://www.modelsport.co.uk/index.php?product_id=12193 PS that car looks brand new !!! |
#20
|
||||
|
||||
Will a hard case lipo fit in it tb01
|
|
|