|
||
|
 |
|
||||||||||||||||||
|
#82
24-11-2006
|
||||
|
||||
Quote:
I drew them, using a commercially available airbrush template as a reference, then scanned them, then plotted them out onto Avery masking vinyl. I cut them all apart and laid them down in about 5 or 6 pieces, and faded in the transparent SpazStix anodized red behind them. It was actually a pretty easy paint job once the drawings were done...  It's a very strange feeling seeing someone else drive my old car on the other side of the world... and do very well with it! I figured it would turn up eventually over here. 
Last edited by ApexSpeed; 24-11-2006 at 12:02 AM. 
|
|
#83
24-11-2006
|
||||
|
||||
|
Ah so you're where Tom got his car from. Was in excellent condition, a refreshing change to some of the shite I've seen change hands over internet transactions.
Unfortuatly the chassis is no longer as mint as it once was eh Tom? 
__________________
 Nortech is ACE!
|
|
#84
24-11-2006
|
||||
|
||||
|
And it'll only get worse as papa smurf mechanics it......
 G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing 
|
|
#86
24-11-2006
|
||||
|
||||
Looks good, Tom, glad the car is working out for you. With all of the off road and carpet tracks in this area closing down, I kind of got left high-and-dry with all of my cars. It's better that someone gets to race them than they sit on the shelf and collect dust.
|
|
#87
26-11-2006
|
||||
|
||||
coming back into the thick off it
 Well Bought a b4 and thought i would teach my son how too twidle the thumbs, better get a good teacher. Painted the shell ( the old airbrush still works) Its been i while since i last competed Need some advice on servos going to try and do batley 10th decKIller
|
|
#88
27-11-2006
|
||||
|
||||
|
If G won with a walking pace car cos he couldn't get the right pinion on, how much is he going to win by if he gears it correctly?
If I can get my car to hold together for more than 2 minutes at a time (2.5 minutes for the motor) I reckon I can challenge more. I might have found a source for some RC10 bits ( I cannot give away my sources) and he has some new shock bodies (note jim!!!!) so some rear damping won't go a miss either! Not sure if he can source a dogbone though
__________________
Nortech is ACE!
|
|
#89
27-11-2006
|
||||
|
||||
|
Er, wrong thread?
 G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
 |
|
|
Linear Mode
