Go Back   oOple.com Forums > General > Vintage RC

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 30-04-2010
fugginmark fugginmark is offline
Member
 
Join Date: Apr 2010
Posts: 1
Talking This is the exact info I needed

Quote:
Originally Posted by terry.sc View Post
The bodyshell, part number UM18, is still listed as available to order from Kyosho Europe, price is £18.10

As an alternative there is a replica Turbo Ultima body available here

The rear axles use standard 12mm hex drives, so a lot of wheels are available from Tamiya, Academy and Kyosho that will fit on there.

The front axles are the tricky ones, with the axle being 4mm. For my Ultima I use HPI front wheel adapters that let me use 4 x 8mm wheel bearings with Tamiya front wheels that have an 11mm hole.

Alternatively to use 5mm axles get the uprights and axles from the Tower Hobbies ST-15

To fit Associated or Losi front wheels
replace the front axles with Kyosho Ultima RB axles, part numbers RS26 front wheel shaft and RS3 knuckle arm, changes the axles to US size which means the wheels and US size bearings will fit straight on.

If you need any spare wishbones and Kyosho have no more, then take a look at the Tower Hobbies ST-15 parts list as it uses identical wishbones and suspension mounts.

Shock clamps are very hard to come by and the correct ones are very expensive to buy. I use a set of shock clamps from a Kyosho Raider buggy. I picked up the complete buggy for less than the price of the Ultima shock rebuild kits, and the raider clamps are a much stronger design.
I have been killing myself trying to find a bearing that will go into an HPI MT Mesh wheel and fit my vintage ultima front hub (imposable)
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com