Loose rear

[NeilD]

The delivery times are so quick it's unreal, they give the best service i've had when ordering online.

[IndyYokomo]

I have tried Yokomo USA, RC Champ, several other online suppliers but no one has these in stock. Does anyone have a line on some? Or know what other manufacturer's shafts would work? Thanks for any suggestions.

[cabbynate]

Originally Posted by IndyYokomo

I have tried Yokomo USA, RC Champ, several other online suppliers but no one has these in stock. Does anyone have a line on some? Or know what other manufacturer's shafts would work? Thanks for any suggestions.

Are these shock shafts for the BX? If so look in the new products link on Yokomo USA'a web site.......

[dummy]

Originally Posted by IndyYokomo

I have tried Yokomo USA, RC Champ, several other online suppliers but no one has these in stock. Does anyone have a line on some? Or know what other manufacturer's shafts would work? Thanks for any suggestions.

use assoc 1.02" shafts. they are .8mm longer i think. very close anyway.

[IndyYokomo]

Associated shafts are smaller in diameter. Has anyone tried them? Do they seal ok? These are the longer than stock rear BX shafts for use with the modified shock mount.

[dummy]

Originally Posted by IndyYokomo

Associated shafts are smaller in diameter. Has anyone tried them? Do they seal ok? These are the longer than stock rear BX shafts for use with the modified shock mount.

actually they're slightly wider in diameter. got them on mine. no problems at all except its a bit tight getting on the piston..

[johnnyboy]

A/E shafts are about 2.5mm in diameter vs Yokomo's 2mm. Kyosho make a 50mm long shaft that is 2mm dia. from the RB5 rear shocks. It should fit fine.