|
#61
|
||||
|
||||
Is it the belt or is it the front wheels binding, check the other threads on here
http://www.oople.com/forums/showthread.php?t=172089 maybe the problem, hope this helps
__________________
Dave www.norfolkbuggyclub.moonfruit.com kyosho optima,Bosscat,Boomerang,,RB5 Vega,RB7,,RC12 5.2, TLR22-4,MP9,HB807T Flask of tea & a rollup Anglia model centre & CT Models http://www.oople.com/forums/showthread.php?t=28117 |
#62
|
||||
|
||||
tanx look into it on weekend and seemed fine but will put some washers in and see tanx!
__________________
HOT BODIES R A B HOBBIES TEAM POWERS K.E.O.R.C.A |
#63
|
||||
|
||||
Hi all.
1. How do you guys like your SRX-4? do it hold up ore is it fragile, how do it perform? 2. is there some must have parts right from the go? saddle pack ore Shorty? 3. and how is it compared to TLR 22-4 ore Kyosho ZX6 if anyone can give a word ore two Thanks. Last edited by dMITIj; 07-10-2015 at 05:40 PM. |
#64
|
||||
|
||||
I had myne as frist in België.
And I run it shorty sinds Day one . On low grip it works verry good sinds Day one . On hich grip I ran it aswel Bud than u will need the alloy shassis and run it with saddels or that is what I will do next time on hich grip . Eder way I like the way it drives and handels verry mutch .
__________________
topspeed modelshop Ralls racing Rc-speedhouse Rude-Bits Serpent Fba section offroad chairman. |
#65
|
||||
|
||||
wtf, is Jorn Neumann back on his Durango?
http://gallery.neobuggy.net/2015race...-4WD/i-4F4SbMm |
#66
|
||||
|
||||
It's not even a serpent prototype but a fully fledged Durango (v5 or so)
more pix http://gallery.neobuggy.net/2015race...rlds-Day-6-4WD |
#67
|
||||
|
||||
Just get any old durago chassis, and stick a serpent sticker on it, and you've got their new car.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#68
|
||||
|
||||
__________________
'There are two choices in life-Take it or leave it !' Yokomo - Nemoracing Sb Designs http://www.fairfueluk.com/ |
#69
|
||||
|
||||
im awaiting my SRX-4 to show up next week i hope, but in the meantime ill like to get the stof i need for a shorty-setup
So were can i buy the stuff needed for a shorty setup? and can this be done on the Carbon chassi with a normal drill ore? and is there a "how to" any were? Last edited by dMITIj; 10-10-2015 at 06:56 PM. |
#70
|
||||
|
||||
The only thing u need is a dremel.
And a small piece off epoxy to make a New batery stap Nothing 2 it
__________________
topspeed modelshop Ralls racing Rc-speedhouse Rude-Bits Serpent Fba section offroad chairman. |
#71
|
||||
|
||||
http://www.neobuggy.net/2015/10/13/s...ds/#more-64942
Wow just read this, it weaves and snakes a bit but basically we just released the car and already admit the production version is so bad in high grip that the team couldn't even use it as their last choice and are already designing a new car! And now Gerd working with us we are designing a new car….the durango.Wow, great news for all those who have bought one And the 2wd we opted to use the durango oops sorry I mean prototype car with front drive shafts removed.As anything was better than what we are selling What a great PR job, I thought the 4wd was designed to be a dirt and european style astro car? I hope they have a healthy bank balance as I'd be amazed if this behaviour boosts sales of a new 4wd. Could have been worse tho, Jorn could have won with it, that would have been tricky
__________________
Dave www.norfolkbuggyclub.moonfruit.com kyosho optima,Bosscat,Boomerang,,RB5 Vega,RB7,,RC12 5.2, TLR22-4,MP9,HB807T Flask of tea & a rollup Anglia model centre & CT Models http://www.oople.com/forums/showthread.php?t=28117 Last edited by racingdwarf; 14-10-2015 at 10:14 AM. |
#72
|
||||
|
||||
Quote:
That is NOT what it states. That is the way you are reading it for whatever reason. I am sure many of you have been around the sport for years and realise that every manufacturer would do whatever it takes to win a world championship. I can name you all but one that had prototype cars and really none of them did any good apart from X-Ray (obviously) For your info, we cannot get enough SRX4 kits for the demand and what happened at the worlds on a stupid track and surface is sod all to do in how good the current cars are in the real world and the tracks we race on. Yes the SRX2 MM might just might not have the edge on high grip Astro but as a mid car its one of the best. Furthermore, if you look at Billy's lap times on a surface he has never driven on, he was doing as good if not better than the prototype cars. That clearly states the cars were good. Don't mind anyone giving their opinions but only if all the facts are presented please and please also not that my comments are not to become argumentative but to simply state facts. Everyone has opinions and all are respected Catch you all soon Tony Evdoka
__________________
|
#73
|
||||
|
||||
Quote:
__________________
'There are two choices in life-Take it or leave it !' Yokomo - Nemoracing Sb Designs http://www.fairfueluk.com/ |
#74
|
||||
|
||||
Hi tony. My point, If you produce a product you stand by it, Just as you have here.I agree most were using prototypes based on the car they are currently producing and selling, some we may see in the future like the Kyosho 2wd used by Elliot etc and some we may not like the AE car. But how many teams arrived track side with a car from another manufacturer? Serpents top drivers arrived not with a prototype, they arrived with durangos with serpent stickers on the shell apart from billy who stood by his design as you would expect.
Sod the worlds this is about respecting customers who are spending their hard earned money on serpent product.If the new car,parts and plans had all gone tits up then serpent were only left with one choice, use the car they have just released SRX-4 and if the team drivers didn't like it well tough thats part of being a team.So say Jorn won with the Errrm prototype do you put World Champion on the SRX-4 Box? The B44 was obviously causing the team a headache but they didn't rush back to the hotel and build X-rays for the next day. Manufacturers I have seen do many things to win worlds, but never use a different make then call it there own But I do agree with one thing mate, world track was poo, and who do you think you are with "tut tut"
__________________
Dave www.norfolkbuggyclub.moonfruit.com kyosho optima,Bosscat,Boomerang,,RB5 Vega,RB7,,RC12 5.2, TLR22-4,MP9,HB807T Flask of tea & a rollup Anglia model centre & CT Models http://www.oople.com/forums/showthread.php?t=28117 Last edited by racingdwarf; 14-10-2015 at 10:01 AM. |
#75
|
||||
|
||||
tut tut
__________________
|
#76
|
||||
|
||||
Oooo I could crush a grape!
__________________
Dave www.norfolkbuggyclub.moonfruit.com kyosho optima,Bosscat,Boomerang,,RB5 Vega,RB7,,RC12 5.2, TLR22-4,MP9,HB807T Flask of tea & a rollup Anglia model centre & CT Models http://www.oople.com/forums/showthread.php?t=28117 |
|
|