|
#1
|
|||
|
|||
Tweak stations
Been having a look around at tweak stations recently and have noticed that, typically, Hobbyking have a Trackstar job for spare change.....has anyone tried one? If so, any good?
Bar the Hudy one, is there any other bargain alternatives?
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
#2
|
||||
|
||||
Best one I found was the laser versions, not as critical to get them level when setting them up. Intergy made them
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#3
|
|||
|
|||
Are they worth the outlay, or should I just stick with setup wheels and lifting the car on the centreline?
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
#4
|
||||
|
||||
disagree im affraid, if you have one front shock 1mm longer than the other or more droop on one side the longer side will lift last, so you will adjust the opposite side to correct, but your not resolving the issue, only masking if via the lift method, on a tweak station, you are measuring the load on each wheel as the car sits on the track (granted your droop etc would still be wrong) pan car can still be same fixed many racers cars tweak quickly and easy on my station
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD Last edited by mark christopher; 06-11-2017 at 08:01 PM. |
#5
|
|||
|
|||
Measure shock length and confirm even droop with the droop gauges, then you’re not masking anything surely?
__________________
TC - Serpent S411 ERYX3.0, Xray T4 2015 GT10 - CRC Vintage Projects - TC3 FT, Yokomo Works, Procat, Fireblade |
|
|