|
|||||||||||||||
|
#1
|
||||
|
||||
|
just spent less than an hour doing this mod
see here Going to much more user friendly now I don't need to insert/remove the module each time it leaves/returns the tranny bag. It can also be laid over if need be with out fear of the ariel breaking the case pivot point.
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
|
#2
|
|||
|
|||
|
I have the M11 with the Sanwa 2.4Ghz module.
Was the guide as easy to follow as it looks? Any issues you came across?
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
|
#3
|
||||
|
||||
|
Ive seen Steve Kirk's (Kirky) M11 Converted like that - Looks spot on dead tidy!
__________________
|
|
#4
|
||||
|
||||
|
Yes
Didn't need to ream out ariel hole in tranny case. Removed bottom section of Spekrum ariel tube, the part that swivels. Top part needs a gentle tug to remove. Then wire and antenna were left in bottom half . Then removed wire from swivel and pushed antenna back up main tube.Ariel wire is crimpped into the fitting @ the end of it and is a good push fit onto the board. Had to resolder wire to clip. Ground away part of the ariel channel in the case for the ariel wire to pass through so as not to trap it. When put back together the top of the Skektrum areil mast is soft so is crimped in place by the to case halves going together again. Just need to remove the sleeve on the back of the module now. I'll see about some pics in a day or two
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
|
#5
|
||||
|
||||
|
A friend tried that with the Sanwa module. He said it was very hard to do because of the nature of the antenna wire (coaxial?), so be careful.
__________________
Schumacher KF | K1 Aero | RWS RZ6R |MiniZ MR-03 | Orion R10 esc | LRP motors | Orion 90c lipos Rusti Design - Awesome custom stickers and cool stuff My trader feedback |
|
#6
|
|||
|
|||
|
Im going to do that with my sanwa super exces, ive seen pictures of it done before.
Dont supose theres any online info kicking about before I pull it apart? cheers |
|
#7
|
|||
|
|||
|
http://3hobby.net/modules.php?name=F...=asc&start=195
Dan, only thing I can find is a pic of the finished mod at the bottom of that thread. Cant find a step- by-step sorry....but its basically just taking the back cover off, jamming the aeriel from the Spektrum module in the hole and refitting the back??
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
|
#8
|
|||
|
|||
|
cool, cheers chris, hopefully will be a simple a job
|
|
#9
|
|||
|
|||
|
Im worried im going to have to 'modify' my UpGrade-RC skin on my M11 to do the mod
lol
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
|
#10
|
||||
|
||||
|
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
![]() |
|
|