|
#1
|
||||
|
||||
LRP Flow issue
Ive got an LRP flow, manual says there are7 mode settings yet mine has a few more so any ideas?
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#2
|
||||
|
||||
I had this issue, check which version of the software is installed, then look at the set up guide for that version. Latest software has a few more settings.
|
#3
|
||||
|
||||
Quote:
http://www.lrp.cc/en/service/software-update/ Download the file for free and you get the extra setting on a pdf file.
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#4
|
||||
|
||||
Ok, great, issue is i havent been able to find updated manuals so any idea where to look? Just seen the above reply, will have a look, thanks
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#5
|
||||
|
||||
Ok really am puzzled, havent found other manuals with more modes yet ive got at least nine compared to the manuals seven, but whats doing my head in is my works has got reverse and cant stop it so sorry for sounding dumb but any ideas
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#6
|
||||
|
||||
Check this out:
http://site.petitrc.com/reglages/lrp...tsLRPFlow.html Looks like firmware v4.7 has 10 modes available, all others have 7 excluding v3.8 which has 8. Pretty sure I run v3.8 which is the latest firmware for buggys. I suggest trying to get the firmware changed to v.3.8, what puzzles me is that non of theses mention reverse |
#7
|
||||
|
||||
Quote:
Thanks guys for all your help, really appreciate it.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#8
|
||||
|
||||
I picked a 2nd flow to go in my 4wd, bought it off ebay, was pleasantly surprised that it came with a spec 2 link bridge which wasnt advertised in the listing, it had v5.4 on it for stock racing so updated it last night to v3.8.
When you plug it in it should display which software was installed which may help explain the reverse. Maybe someone has somehow installed the firmware of a different LRP ESC that has reverse on it. I think as soon as you update the firmware it should solve the issue, but yeh a real mystery |
#9
|
|||
|
|||
There are only 2 1/10th buggy firmware for the flow.
The v1.4 is the original and is designed for high grip conditions V3.3 and now V3.8 is designed for low grip conditions. As far as I am aware if you are using these 2 firmwares there are only 7 modes, but they both vary greatly in what they are used for but mode 1 is autobrake in both and mode 7 is cut off in both Hth |
#10
|
||||
|
||||
As someone as already suggested I'd say your not running the flow firmware as I've never known an option for running reverse.
|
|
|