|
#1
|
|||
|
|||
Hobbywing v2.1 esc issues
Hi.
Anyone shed any light on this. Has happened 3 times now. Start of the final. Car sat on grid. It was driven couple of laps then placed in position. Buzzer goes .. Nothing. Today 3 cars piled into me. Punted off the track. All over before it began. It seems like if i leave car sat there then it goes to sleep??
__________________
AE all the way RC10B6.1d Maclan powered RC10T6.1 Maclan powered RC10B74 Maclan powered #rcoctane #teamrcoctane |
#2
|
|||
|
|||
Do you have reverse on? Mine used to do this with reverse, if I like double tapped the brakes into a corner it took a double tap of the throttle to get it going again. I turned off reverse and its been fine ever since.
|
#3
|
|||
|
|||
Hi, thanks for reply,
but I dont have reverse on, its forward/brake only so frustrating, its ruined at least 2 finals for me time to try maybe a new sensor cable??
__________________
AE all the way RC10B6.1d Maclan powered RC10T6.1 Maclan powered RC10B74 Maclan powered #rcoctane #teamrcoctane |
#4
|
|||
|
|||
Wasn't there a hobbywing/hobbyking ESC that would switch off if you tapped reverse two (three) times?
Actually as a feature. You've not got one of those have you? I'd also look at rebinding/recalibrating the ESC. (check things like neutral bandwidth and so on) Then reflashing the firmware/reprogramming from scratch. Then rewiring everything. (Do the sensor cable first, cos thats easy) |
#5
|
||||
|
||||
my boy has suffered with an esc that if you hold the brakes for a few seconds it switches off don't know if that's an issue but it caught us out
|
#6
|
||||
|
||||
Holding the brakes on for a few seconds turns them off - it's a 'feature'
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#7
|
|||
|
|||
Ahhhh. Great useful feature... lol
Thanks. Dont remember doing this but does make sense. Especially as at tiverton where its happened twice I was gridded on a slope and tried to hold position. Will try it out tonight and see if it does turn off.
__________________
AE all the way RC10B6.1d Maclan powered RC10T6.1 Maclan powered RC10B74 Maclan powered #rcoctane #teamrcoctane |
#8
|
||||
|
||||
northy nailed it, hobbying if you hold full brake it switces off, the new xr10 you can ndisable it, not sure if you can on 2.1 or 3.1
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#9
|
|||
|
|||
cheers guys, old bad habit from racing largescale, I used to hold brake till just before buzzer to ensure no risk of jumpstart claim.
was obviaouly holdig it althought it probably didnt do much LOL, at Tiverton as I was on a downslope on the grid. guess I did it again yesterday but just didnt realise wasnt a good start to my final, 3 cars in a right old tangle, funny enough all B6 and all same colour with same chassis protectors LOL, carnage
__________________
AE all the way RC10B6.1d Maclan powered RC10T6.1 Maclan powered RC10B74 Maclan powered #rcoctane #teamrcoctane |
#10
|
|||
|
|||
Try reducing your brake epa to 99%, this should stop it as the off function works on max brake.
|
#11
|
|||
|
|||
thanks, think I need to look at the setting for the neutral band??
have a really wierd thing happening if I move the stick the tiniest bit from centre, like maybe if Im stood waiting for warble and just aplied a bit of pressure, then punch forward, nothing happens let go and push it again and it goes so... if I push stick forward ultra slow or just rest thumb against it enough to move it slightly, thenunless I let go fully, it wont move??
__________________
AE all the way RC10B6.1d Maclan powered RC10T6.1 Maclan powered RC10B74 Maclan powered #rcoctane #teamrcoctane |
Thread Tools | |
Display Modes | |
|
|