|
#1
|
||||
|
||||
Which Batteries Used in TRF511
Ok guys, just information wise really, wondered what Lipo's people are running in their trf511's?
Only really interested to know which batteries fit in the standard position (centre bulkheads ground down) under the top decks rather than being sat out wide. Especially interested to know if tany of the packs with integrated wires (corally/reedy) fit? Dave |
#2
|
||||
|
||||
I keep looking at the 511 Dave must try to be sensible for once !
If you want those bulkheads modding then bring them to Worksop on Sunday and i`ll sort them for you there. |
#3
|
|||
|
|||
SPEED POWER all the way Dave ............
|
#4
|
||||
|
||||
I had TrakPower 3200s under the bulkhead without adjustment.
I've now got IB 4200s, dremelled a small amount off the bulkheads to fit them in standard position. |
#5
|
||||
|
||||
SPEED POWER!!! theres no other lipo even worthy!
__________________
Tamiya ~ Mugen Seiki ~ Viper RC ~ Pro-Line ~ Xpert Servos ~ BEAT ~ Protek RC ~ Amain Hobbies ~ LMR ~ Ultimate Racing ~ Nitrolux ~ Nibbo Designs ~ Stickit1 Racing ~ The World Famous TFR! |
#6
|
||||
|
||||
Anybody know if the Reedy's fit?
|
#7
|
||||
|
||||
Most will fit im pretty sure. just might need a wee mod!
__________________
Tamiya ~ Mugen Seiki ~ Viper RC ~ Pro-Line ~ Xpert Servos ~ BEAT ~ Protek RC ~ Amain Hobbies ~ LMR ~ Ultimate Racing ~ Nitrolux ~ Nibbo Designs ~ Stickit1 Racing ~ The World Famous TFR! |
#8
|
||||
|
||||
There's loads of room under the top deck, just a little bit of bulkhead that's in the way. Choppy choppy!
|
#9
|
||||
|
||||
2 packages arrived from Hong Kong today, one yesterday ........... all I need now is the damn car LOL
|
#10
|
||||
|
||||
With what greatest height batteries on the TRF511 approach?
|
#11
|
||||
|
||||
Anybody knows?
|
#12
|
||||
|
||||
you will get most lipo's in there, just depends on how much you want to file off the motor mount bulkhead..for a 23.5mm lipo you will need to take off about 1.5mm, higher the lipo the more you need to take off and to answer dave's question i run ib4200 which needs about 1.5mm off, but just got the ib5200 and to get them in i need to take about another 1mm off.
|
#13
|
||||
|
||||
IB5200....your's is nearly always one of the fastest cars on the track to begin with......
Which IB5200 did you get Stephen..... Linky???
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
#14
|
||||
|
||||
Im going to use the demon 4200,im also using the rudebits brass lipo tray and to get round the lipo's fouling on the bulkhead i have moved the tray back 3mm perfect fit
__________________
Cobra Racing Products,Penguin Custom Bodyshells,Ultimate RC Workshop,RC Car Zone |
#15
|
||||
|
||||
Quote:
here ya go mate http://cgi.ebay.co.uk/Intellect-Lipo...item439cf575c6 |
#16
|
||||
|
||||
Using Fredrik Emilsson's LiPo tray, I have no problems at all (no bulk head Dremeling required) fitting the IP 5 200 mAh 45C LiPos.
The only thing I needed were two spacers/washers on each battery post for them to fit.
__________________
The Tamiya Sheep Various Tamiyas including TRF201 and TRF511 |
#17
|
||||
|
||||
Im using vampire 4400. Also have rudetony brass lipo tray and well worth the cash.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
|
|