|
#1
|
||||
|
||||
Core RC Titanium Ball Studs - Cat SX
Which lengths are people using?
I've found they're a much nicer fit than the standard ones so was going to look at replacing them on the car. Anyone else using them? |
#2
|
|||
|
|||
I would also like to use these in my Mi4 as I prefer the 2mm hex fitting, however they are no longer available from Schumacher (discontinued due to lack of popularity). I've been unsucessful in finding anyone with the long ones in stock!
Regards Ian |
#3
|
|||
|
|||
I use the core RC ones, Standard size of the stock ball studs. In the arms to hold the shock eye. I use a long stud so they dont rip out as easy.
__________________
Team Schumacher USA // Speed Passions // Core Rc Long Island Raceway and Hobby // DarkSide Designs |
#4
|
||||
|
||||
Is that the CR017 part number as there are three.
Ultra short, short and long I think. |
#5
|
|||
|
|||
CR018 is what I used. And for the arms, I have used the Losi Titanium ones. They are a little longer.
__________________
Team Schumacher USA // Speed Passions // Core Rc Long Island Raceway and Hobby // DarkSide Designs |
#6
|
||||
|
||||
Cool I'll order a pack for the front out camber studs etc.
|
|
|